Boil-Out

BOIL OUT - Heavy Duty Hot Tank Compound

Note: Product color may vary from white to light yellow. For heavy duty cleaning of tanks, radiators and other equipment by the "Hot Tank Method"
For Industrial & Institutional Use Only!


DO NOT USE ON ALUMINUM!

DIRECTIONS FOR USE TANK CLEANING METHOD - When using as a soak type cleaner, use 6 to 8 ounces of compound to each gallon of water. Maintain solution temperature at approximately 180 degrees fahrenheit for best results. Keep tank covered when possible to avoid heat loss and to minimize vapor release. It may be necessary when solution becomes weak to add additional material to enhance cleaning.

PRECAUTIONS WHEN HANDLING --Wear goggles- face shield, -rubber gloves and protective clothing Avoid all contact with skin, eyes and clothing While making solutions, add this product slowly to cool water to avoid violent splattering Do not mix with acid or solvents. Avoid breathing fumes or mists Use with adequate ventilation Used approved respirator if necessary

DANGER - CONTAINS CAUSTIC SODA (SODIUM HYDROXIDE) CAUSES SEVERE BURNS KEEP OUT OF REACH OF CHILDREN HARMFUL IF SWALLOWED - DO NOT TAKE INTERNALLY READ

MATERIAL SAFETY DATA SHEET BEFORE USING PRODUCT

DOT Shipping Name: Corrosive Solid, Basic, Inorganic, NOS (containing Sodium Hydroxide), B, UN3282, PG11

24 Hour Emergency: 404-874-3326

: